Como crear un DHCP Server en Cisco

[HECTORCHIMAL]

TOPOLOGÍA

Configurar interface LAN

Router>enable
Router#conf t 
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int et0/1
Router(config-if)#ip add 192.168.10.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
*Oct 22 17:13:10.855: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up
*Oct 22 17:13:11.878: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up

Configurar servicio DHCP

Router(config)#ip dhcp excluded-address 192.168.10.1
Router(config)#ip dhcp pool DHCP-LAN                
Router(dhcp-config)#network 192.168.10.0 255.255.255.0   
Router(dhcp-config)#dns-server 8.8.8.8 8.8.4.4           
Router(dhcp-config)#default-router 192.168.10.1          
Router(dhcp-config)#exit                                 
Router(config)#

Configurar IP mediante DHCP en la PC

VPCS> ip dhcp
DDORA IP 192.168.10.2/24 GW 192.168.10.1
VPCS>