Gracias: 
Me agrada: 
Me desagrada: 
Sesion BGP ipv6 para clientes residenciales
Es un protocolo de enrutamiento utilizado para intercambiar información de enrutamiento entre diferentes sistemas autónomos (AS) en Internet. Un sistema autónomo es un conjunto de redes y routers bajo el control de una única entidad administrativa, como un proveedor de servicios de Internet (ISP) o una organización.
Descripción
Vamos a crear un laboratorio en EVE-ng de acuerdo a la topología para simular una red con BGP, configurando los ASN en cada RB para que se pueda establecer el pering.
1 Script de Router Alestra
/interface bridge
add name=lo interface=ether4
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/routing bgp instance
set default as=100 router-id=10.20.30.1
/ip dhcp-client
add disabled=no interface=ether1
/ipv6 address
add address=2001:4860:4860::8888/128 advertise=no comment="DNS GOOGLE" \
interface=lo
add address=3000:aba:1010:1010:1010:2020:101:1 advertise=no interface=ether2
/routing bgp peer
add address-families=ipv6 default-originate=always name=CPE_BM \
remote-address=3000:aba:1010:1010:1010:2020:101:2 remote-as=200
/system identity
set name=CarrierAlestra
/tool romon
set enabled=yes
2 Script de Router Borde Megabit
/interface bridge
add name=lo
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/routing bgp instance
set default as=200 router-id=10.20.30.2
/ip dhcp-client
add disabled=no interface=ether1
/ipv6 address
add address=3000:aba:1010:1010:1010:2020:101:2 advertise=no interface=ether2
add address=2906:666:3010:aaaa:bbbb:cccc:ddd:1 advertise=no interface=ether3
/ipv6 route
add distance=1 dst-address=2906:666:3020::/44 gateway=\
2906:666:3010:aaaa:bbbb:cccc:ddd:2
add distance=1 dst-address=2906:666:3030::/44 gateway=\
2906:666:3010:aaaa:bbbb:cccc:ddd:2
/routing bgp network
add network=2906:666:3000::/36 synchronize=no
/routing bgp peer
add address-families=ipv6 name=WAN_IPv6 remote-address=\
3000:aba:1010:1010:1010:2020:101:1 remote-as=100
/system identity
set name=BordeMegabit
/tool romon
set enabled=yes
3 Script de Router EncoreUrbi
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ipv6 dhcp-server
add address-pool=POOL_CLIENTES interface=ether6 name=server1
/ipv6 pool
add name=POOL_CLIENTES prefix=2906:666:3030::/44 prefix-length=64
/ip dhcp-client
add disabled=no interface=ether1
/ip dns
set servers=2001:4860:4860::8888,2001:4860:4860::8844
/ipv6 address
add address=2906:666:3010:aaaa:bbbb:cccc:ddd:2 advertise=no interface=ether1
add address=::1000:10ff:fe09:1115 from-pool=POOL_CLIENTES interface=ether6
/ipv6 nd
set [ find default=yes ] other-configuration=yes
/ipv6 route
add distance=1 gateway=2906:666:3010:aaaa:bbbb:cccc:ddd:1
/system identity
set name=EncoreUrbi
/tool romon
set enabled=yes
Laboratorio en EVE-NG
Laboratorio EVE-NG
Citar